The article describes how to connect a wireless Netgear modem to a computer when it encounters problems. The methods that are compiled here are simple and correct to the date. However, it is suggested to follow carefully to avoid problems. This will ultimately eliminate the need to search the router for Netgear support.
Each site has its own Internet Protocol address. This is a set of numbers such as 192.168.0.1 or 192.168.1.1 divided into four sections and each section to three numbers of atoms. Often there are even four numbers. It may even look like 188.8.131.524. Like these numbers are fairly hard to remember web addresses, to which relatively simple operation is used. But a web address connected to each IP address is the computer network to leave whatever you need and where to get it, http://www.192168-1-1.info/.
192.168.1.1 is a private IP and can be used by any computer, modem or Internet device. However, it should be noted that if multiple devices are connected to the Internet, only one can use that address as the default address, otherwise it would conflict. Access to IP 192.168.1.1 is very easy, since only the address in the browser enter. You can access this address by typing 192.168.1.1 in the browser address bar and pressing the Enter key. This will allow you to connect your device to the Internet on the configuration page where you specify the settings. You would need a username and password and usually both are defined as “admin”.
Enabling encryption is a two-step process. First, configure your router to use encryption with a coding key of your choice. Then, configure your computer to use the encryption key. The actual configuration of the router processes for encryption varies from router to router. Please consult the manual of the router.
If the status LEDs are not accessible – be your situation so that you do not have access to status displays. Using the following method, you can quickly verify whether to connect two computers on your network as they should. This method is for Windows operating systems, although it works essentially the same way with Mac and Linux operating systems.
There are several vendors who use it as their default IP address privately to connect the router’s web page. From there, they can easily modify the details of the modem settings to create their network secure environment. At the same time, the user can also filter addresses and change the DHCP settings at the same time. But there are other features that can be easily accessed on the web router side 192.168.0.1 in the address bar by typing. Unfortunately, this is only available for devices that act as a router, modem and wireless access point at the same time.
Normally password: admin and username: password can be used here. If not, have a look at your documentation. If the router account information has been changed by default and you can not remember, you need to reset it. A hard reset deletes all configuration data and returns the factory defaults.
Disable auto-login. Although this security measure has nothing to do with the IP 192.168.1.1, it is still worth mentioning. Your mobile device will try to connect an open wireless network. When this is done, the security is very low. Verify that you have enabled connections and disable them.